supreme-floor-coati20260610170558

Concrete Staining Options Available in Clinton

Thu, 08 Oct 2026 11:00:06 GMT

Concrete Staining Options Available in Clinton

Concrete staining in Clinton, MS transforms plain concrete into a permanent colored surface that enhances patios, driveways, and interior floors without hiding the natural texture of the material. Mississippi's clay soil causes concrete settlement and cracking over time, so crack repair and proper stain selection based on indoor or outdoor location ensure lasting color and appearance.

How Do Acid-Based and Water-Based Stains Differ?

Acid-based stains chemically react with concrete to create variegated earth tones, while water-based stains penetrate the surface with more uniform, vibrant colors.

Acid stains work through a chemical reaction with the minerals in the concrete. The result is a mottled, translucent finish with natural variation. Colors tend toward browns, tans, greens, and rust tones. Each slab reacts slightly differently, so no two acid-stained floors look identical.

Water-based stains use pigments that soak into the concrete pores. They offer a broader color palette, including blues, reds, and blacks. The finish is more consistent and predictable than acid stains. Water-based stains suit projects where color uniformity matters more than natural variation.

What Surface Repairs Should Happen Before Staining?

Cracks and spalled areas must be filled and leveled before staining to prevent uneven color absorption and visible repair lines.

Concrete cracks over time due to soil movement, temperature changes, and settling. In Clinton, clay soil expands and contracts with moisture, causing slabs to shift and crack. These splits must be repaired before staining or the stain will pool in the cracks and create dark lines.

Supreme Floor Coatings fills cracks and grinds the repairs smooth so they blend with the surrounding concrete. This step ensures the stain penetrates evenly across the entire surface. Skipping repairs results in a floor that looks patched rather than refinished. If you're looking for concrete staining services in Clinton , proper crack repair is part of doing it right the first time.

Which Stain Type Suits Outdoor Concrete Best?

Acid-based stains perform better on outdoor concrete because they chemically bond with the surface and resist fading from UV exposure and weather.

Outdoor concrete faces sun, rain, and temperature swings. Acid stains create a permanent color change through chemical reaction, making them more resistant to fading than surface-level pigments. The mottled finish also hides dirt and wear better than uniform colors.

Water-based stains can be used outdoors but typically require a protective sealer to prevent UV damage. They work well on covered patios or shaded areas where direct sunlight is limited. For driveways and open patios in Clinton, acid stains offer better longevity and require less maintenance over time.

Can Staining Camouflage Existing Concrete Imperfections?

Yes, the variegated appearance of acid stains can enhance or camouflage minor surface imperfections, turning potential flaws into design features.

Concrete often has small trowel marks, minor discoloration, or slight texture differences. Acid stains embrace these variations, creating a natural, organic look that makes imperfections less noticeable. The mottled finish adds character rather than highlighting flaws.

Water-based stains are more uniform and may reveal imperfections that acid stains would hide. If your concrete has significant surface irregularities, acid staining is often the better choice. Supreme Floor Coatings evaluates each slab and recommends the stain type that will deliver the best results for your specific surface.

Supreme Floor Coatings operates as a locally owned business in Clinton with experience in both acid-based and water-based staining systems. The team repairs cracks, tests moisture, and selects the right stain chemistry for each project location. For professional epoxy floor installation services in Clinton , or concrete staining work, you'll receive straightforward advice and quality workmanship that ensures your floor looks great and holds up over time.

Experience the difference proper stain selection and preparation make by calling Supreme Floor Coatings at 601-470-5666 today.

How to Choose the Best Epoxy Flooring Contractor in Ridgeland, MS

Tue, 15 Sep 2026 16:47:54 GMT

How to Choose the Best Epoxy Flooring Contractor in Ridgeland, MS: What to Look For and Ask

In Ridgeland, Mississippi, humidity and temperature swings put stress on concrete slabs year-round — and that means the contractor you hire matters as much as the coating itself. A floor installed without proper surface preparation will delaminate and peel within a year or two, regardless of how expensive the product was. Knowing what to look for before you sign anything can save you thousands in redos.

Why Does Surface Prep Determine Whether Your Floor Lasts?

Surface preparation is the single biggest factor in whether an epoxy coating bonds permanently or fails early. Mechanical grinding opens the concrete's pores so the coating can bond at a molecular level, rather than just sitting on top of a sealed or contaminated surface.

Acid etching, which some contractors use as a shortcut, creates a shallow surface profile that is rarely deep enough for a reliable bond. Over time, moisture vapor pushes up through the slab and lifts a coating that was not properly anchored. The result is visible bubbling and peeling — a problem that traces back to day one of the install, not to the product itself.

Cracks in the slab must also be addressed before any coating goes down. Unrepaired cracks telegraph through the finished surface and widen as the concrete moves with temperature changes. A contractor who skips this step is setting you up for a floor that looks bad within months. Learn more about why this step cannot be skipped by reviewing the concrete grinding services process before your next estimate.

What a Professional Multi-Step Installation Actually Looks Like

A professional floor coating job follows a clear sequence: slab assessment, mechanical grinding, crack repair, primer or base coat, decorative layer, topcoat, and a defined cure window before foot or vehicle traffic is allowed. Each step depends on the one before it being done correctly.

Cure time is a reliable indicator of contractor quality. A floor that is handed back for vehicle traffic in 24 hours may not have fully cured, especially in humid Mississippi conditions. A contractor willing to explain realistic timelines — and stick to them — is one who understands how coatings actually perform.

If a contractor cannot walk you through each phase of the process and explain why it matters, that is a gap worth taking seriously. You can review common epoxy flooring questions to benchmark what a thorough answer should look like.

Choosing a Topcoat That Holds Up to Mississippi Conditions

The topcoat applied over your coating system is what you see and walk on every day, and it determines how long the floor keeps both its look and its performance. Polyaspartic clear coatings are UV-stable, cure faster than standard epoxy topcoats, and resist the heat and humidity cycles that are common in Mississippi garages and commercial spaces.

A standard epoxy topcoat can yellow under UV exposure and soften under high heat — both common outcomes in a sun-exposed garage in the Jackson metro area during summer. Polyaspartic chemistry handles those conditions better, which is why topcoat selection is a real conversation worth having with any contractor you consider. Read more about how a polyaspartic clear coating holds up in these conditions before comparing quotes.

A contractor who defaults to the cheapest topcoat without discussing your specific use case — heavy vehicle traffic, sun exposure, chemical contact — is leaving longevity on the table.

How Does Mississippi's Humidity Affect Epoxy Application Timing?

High ambient humidity during coating application can cause adhesion failures before the product even cures. A professional contractor will test the moisture content of the slab and monitor ambient temperature and relative humidity before committing to an application day.

Fall is one of the best windows to schedule a Ridgeland floor project. Humidity drops noticeably from the summer highs, temperatures stay moderate, and the slab is less likely to hold residual moisture from heavy summer rain. Those conditions produce better adhesion and a more predictable cure window than mid-July installs.

Scheduling in fall also means your garage or commercial floor is finished before winter holidays or year-end business slowdowns — a practical benefit beyond just weather. A contractor who cannot discuss moisture vapor testing or temperature minimums for application is a sign that their process may not account for these real variables.

Red Flags Worth Walking Away From

Some warning signs are easy to spot once you know what to look for. Watch for any of these during the quoting process:

No mention of grinding or surface prep in the quote or conversation
A price that seems unusually low — skipping prep steps is almost always how that happens
No local portfolio or examples of completed projects in the Ridgeland or Jackson area
Inability to explain the difference between coating systems or topcoat options
Pressure to sign before a site visit or slab assessment has been completed
Vague or absent warranty language
Use of water-based 'epoxy paint' marketed as a professional floor coating

Questions to Ask Before You Hire Anyone

Bring this list to every estimate. A qualified contractor will answer each one clearly and specifically.

How do you prepare the concrete surface before coating?
Do you use mechanical grinding or acid etching — and why?
How do you handle existing cracks or concrete damage?
What coating system do you recommend for my specific use, and why that one?
What topcoat do you use, and is it UV-stable?
What humidity and temperature thresholds do you require before applying?
What does your warranty cover and for how long?
Can you show me examples of similar projects in the Ridgeland or Jackson metro area?
What is the realistic timeline from start to when I can use the floor?
What maintenance does the finished floor require?

Setting Realistic Maintenance Expectations After Install

A well-installed floor coating does not need much upkeep, but it does need some. Routine sweeping and occasional mopping with a pH-neutral cleaner keeps the surface looking sharp. Harsh chemical cleaners — especially degreasers not designed for coated concrete — can break down the topcoat over time and reduce its lifespan.

Periodic visual inspections for wear, especially in high-traffic zones near garage doors or commercial entry points, let you catch minor surface issues before they become larger repairs. Understanding what to watch for is part of getting full value from the investment. The floor coating maintenance guide covers what ongoing care looks like in practice.

A contractor who explains maintenance expectations upfront is one who expects to stand behind their work long after the install is finished — and that alignment matters as much as any technical credential.

Knowing what separates a quality epoxy installation from a shortcut job puts you in a much stronger position before the first estimate arrives. Schedule your project assessment with Supreme floor coatings to see how a properly vetted, locally experienced coating contractor approaches every step of the process.

Single Color Epoxy Flooring for Madison Workshops and Garages

Sun, 09 Aug 2026 11:00:00 GMT

Single Color Epoxy Flooring for Madison Workshops and Garages

Because workshops and garages demand easy-to-clean surfaces that resist stains and wear, single color epoxy flooring in Madison, MS offers a straightforward solution with a uniform finish and long-term durability. A proper two-coat system with diamond grinding preparation ensures the coating bonds securely and performs in humid conditions common to Mississippi basements and detached shops.

How Does a Two-Coat System Improve Durability?

A two-coat system applies a base coat for adhesion and crack sealing, then a topcoat for wear resistance and chemical protection.

The base coat penetrates the concrete surface and locks down any hairline cracks. It creates a stable foundation for the topcoat. Skipping the base coat or applying a single thick layer often leads to poor adhesion and premature wear.

The topcoat adds hardness and protects against oil, gasoline, and cleaning chemicals. It also gives the floor its final sheen, whether you prefer a high-gloss or satin finish. Two coats together deliver better performance than one thick application because each layer serves a distinct purpose.

What Surface Preparation Is Required?

Diamond grinding removes surface contaminants, opens concrete pores, and creates the texture needed for the base coat to bond properly.

Every concrete floor gets ground before coating. This step strips away old sealers, oils from parked vehicles, and any weak surface material that would prevent adhesion. Grinding also smooths high spots and rough patches left by the original concrete pour.

After grinding, the surface is vacuumed and inspected for cracks. Any splits or damaged areas are filled and leveled. Supreme Floor Coatings grinds all floors as standard practice, not an optional upgrade. For homeowners near you searching for dependable garage coatings, this preparation step is what separates a floor that lasts from one that peels within a year. If you need reliable single color epoxy flooring services in Madison , proper grinding ensures your coating stays put.

Which Color Works Best for Your Workshop?

Neutral colors like gray, tan, and beige hide dust and dirt, while darker shades conceal tire marks and oil stains in garage spaces.

Light colors brighten the space and make it easier to spot dropped tools or hardware. They work well in well-lit workshops where cleanliness is a priority. Darker colors minimize visible wear and suit garages where vehicles come and go frequently.

You can also choose colors that match your home or business branding. Single color epoxy provides a clean backdrop that doesn't compete with storage systems, workbenches, or equipment. The uniform finish creates a professional appearance that makes any space look more organized.

Do Madison Basements Need Special Moisture Considerations?

Yes, basements in Madison can trap moisture from clay soil and seasonal rains, making vapor testing essential before applying any epoxy coating.

Mississippi clay soils hold water, and that moisture can migrate upward through concrete slabs. Basements and ground-level workshops are especially vulnerable because they sit closer to the water table. Without testing, trapped moisture can cause epoxy coatings to bubble or delaminate.

Supreme Floor Coatings tests before applying any coatings on every project, including basement and workshop floors. Testing measures the rate of moisture vapor rising through the slab. If levels are too high, a moisture-mitigating primer is applied before the base coat. This extra step prevents coating failure and ensures your floor performs as expected even during humid Mississippi summers.

Supreme Floor Coatings is locally owned and serves Madison with a team of licensed and insured installers who understand local soil and climate conditions. The company uses diamond grinding equipment and a proven two-coat application process to deliver floors that are built to last. For dependable epoxy floor installation services in Madison , you'll work with professionals who do it right the first time.

Start your project by calling Supreme Floor Coatings at 601-470-5666 to discuss your space and receive a detailed consultation.

Flake vs. Metallic vs. Single Color Epoxy: Best Pick for Your Ridgeland Garage

Wed, 05 Aug 2026 15:57:57 GMT

Flake vs. Metallic vs. Single Color Epoxy: Which Coating Is Right for Your Ridgeland Garage or Shop Floor?

The epoxy system you choose affects more than just how your floor looks — it determines how well the coating handles tire scuffs, chemical spills, foot traffic, and Ridgeland's humid summers. Mississippi's high moisture vapor levels can push up through concrete slabs and cause delamination if the wrong system is installed without proper prep, so matching the coating to your actual conditions matters from day one.

How Do Flake, Metallic, and Single Color Epoxy Actually Differ?

Each system uses a base epoxy resin, but the finish layer determines its look, texture, and real-world performance. Flake adds vinyl chips broadcast over the wet base coat; metallic uses suspended pigment to create a fluid, three-dimensional pattern; single color is a uniform solid-tone base with a clear topcoat.

Here is a fast comparison across the factors most Ridgeland homeowners and shop owners ask about:

Hides dirt and tire marks: Flake — excellent. Metallic — moderate. Single color — poor to moderate.
Slip resistance: Flake — high (texture from chips). Metallic — moderate. Single color — low to moderate.
Maintenance effort: Flake — low. Metallic — moderate. Single color — moderate to high.
Relative cost: Single color — budget to mid-range. Flake — mid-range. Metallic — premium.
Best setting: Flake for garages and shops. Metallic for showrooms and gyms. Single color for light-use or studio floors.

Which Epoxy Hides Dirt Best in a Working Garage?

Flake epoxy hides dirt, oil drips, and tire marks better than any other system because the speckled chip pattern visually breaks up surface residue between cleanings.

When vinyl chips are broadcast into the wet base coat, they create a random multi-tone texture that camouflages debris. A single-color floor shows every dust particle and scuff in sharp contrast, which means you are sweeping or mopping far more often to keep it looking clean.

Flake also delivers built-in slip resistance — the raised texture from the chips gives footwear something to grip, which is a real safety advantage in a shop where fluids occasionally reach the floor. If you want to go deeper on how this system is installed, see metallic epoxy flooring and flake options side by side to understand how application technique differs between the two.

Is Metallic Epoxy Worth the Extra Cost for a Home Gym or Showroom?

Metallic epoxy is worth the premium when the floor is a visual focal point — a home gym, man cave, or client-facing commercial space where the coating itself is part of the design.

The pigment particles suspended in the resin create a lava-flow or three-dimensional swirl effect that no other system replicates. Because the surface is smooth and high-gloss, it wipes clean easily in a gym or studio setting where the main debris is dust and light foot traffic rather than heavy grease or chemicals.

The trade-off is that a smooth metallic surface shows scuffs and heel marks more visibly than a flake floor, and high-traffic zones like workshop entrances may show wear faster without a durable polyaspartic topcoat protecting the finish layer.

Does Single Color Epoxy Still Make Sense for Any Ridgeland Floor?

Single color epoxy is the right call when you want a clean, minimal look and the floor sees light use — a storage area, a boutique studio, or a prep space where aesthetics matter but heavy vehicles never enter.

The uniform finish looks sharp right after installation, but because the surface is smooth and one solid tone, it reveals dust, moisture rings, and foot traffic marks more readily than flake. If you choose this system for a light-commercial space, a consistent sweeping routine keeps it looking the way it did on install day.

Adding a Polyaspartic Topcoat — Especially Important in Mississippi Summers

A polyaspartic clear topcoat can be applied over any of the three base systems, and in Ridgeland's climate it is often the factor that determines whether the floor holds up through summer.

Standard epoxy topcoats have a narrow application window when concrete surface temperatures run high — Mississippi summers routinely push slab temps past the threshold where standard epoxy cures correctly. Polyaspartic chemistry tolerates higher ambient temperatures, cures significantly faster, and is UV-stable, which means it will not yellow when garage doors stay open and sunlight reaches the floor. Check the full polyaspartic topcoat options to see how this finishing layer is applied over each base system.

How Ridgeland's Climate Affects Your Epoxy Choice

Mississippi's heat and humidity create two specific challenges: moisture vapor pushing up through concrete slabs, and UV exposure from open garage doors and commercial windows. Both issues affect how long any epoxy system adheres and keeps its appearance.

Moisture vapor transmission is the most common cause of epoxy delamination in this region. Diamond grinding the slab before installation opens the concrete's pores for a mechanical bond and removes the surface layer where moisture concentrates. Skipping this step — or using a grinder that does not reach the correct profile — shortens the floor's lifespan regardless of which system you pick. Learn how this prep step works at surface grinding and prep .

UV exposure matters most for metallic and single color finishes, where color shift and yellowing are visible on a uniform surface. A UV-stable polyaspartic topcoat blocks this degradation, keeping the original color consistent year after year.

Matching the System to Your Specific Project

A two-car garage with kids, vehicles, and a workbench: flake epoxy with a polyaspartic topcoat gives you the best dirt-hiding texture, slip resistance, and chemical protection for day-to-day family use.

A garage converted to a home gym: metallic or flake with polyaspartic topcoat. Metallic if the visual impact is the priority; flake if you want easier long-term maintenance and plan to move heavy equipment across the floor regularly.

A small auto detailing or repair shop in Ridgeland: flake plus polyaspartic is the clear match — chemical resistance, easy hosing down, and a texture that reduces slip risk when the floor is wet.

A boutique studio or light-commercial space with client foot traffic: metallic or single color with polyaspartic depending on budget. Metallic creates the stronger visual impression; single color keeps costs lower if the floor is not the main design feature.

For ongoing care after installation, the floor coating maintenance page covers what each system needs to stay looking sharp long-term.

Choosing the right epoxy system from the start saves you from re-coating sooner than necessary — the correct match for your use case, Ridgeland's climate, and your maintenance habits is what determines how many years the floor performs without issues.

Schedule a consultation with Supreme floor coatings to walk through your specific garage or shop floor and get a clear recommendation based on your actual conditions — browse common questions first if you want answers before you call.

When Should You Install Metallic Epoxy Flooring in Jackson

Fri, 10 Jul 2026 11:00:01 GMT

When Should You Install Metallic Epoxy Flooring in Jackson

If you want a showroom floor that stands out with unique swirl patterns and a reflective finish, metallic epoxy flooring in Jackson, MS delivers both visual impact and commercial-grade durability. T-bar application techniques control the metallic effects, and polyaspartic topcoats add scratch resistance for high-traffic environments.

How Is Metallic Epoxy Different From Standard Coatings?

Metallic epoxy uses special pigments that shift and swirl during application, creating one-of-a-kind patterns that mimic marble or flowing water.

Standard epoxy coatings dry to a uniform color. Metallic versions remain fluid longer, allowing the installer to manipulate the pigments with a T-bar or roller. The result is a three-dimensional effect with depth and movement.

Each floor looks different because the pigments react uniquely to temperature, humidity, and application technique. You won't find two identical metallic floors. This makes metallic epoxy popular in retail spaces, showrooms, and upscale garages where appearance matters as much as performance.

What Application Techniques Create the Best Effects?

T-bar manipulation during the wet stage directs metallic pigments into swirls, waves, or abstract patterns based on your design goals.

After the metallic base coat is applied, the installer uses a T-bar or specialty roller to push and pull the pigments. Light pressure creates subtle shifts, while aggressive movements produce bold contrasts. The process requires experience to balance aesthetics with even coating coverage.

Timing is critical. The installer must work while the coating remains fluid enough to move but not so wet that pigments separate completely. Supreme Floor Coatings has refined these techniques through hands-on practice and uses specialized equipment to achieve professional metallic effects. If you're looking for metallic epoxy flooring services in Jackson , skilled application ensures your floor looks intentional rather than accidental.

Which Spaces Benefit Most From Metallic Floors?

Showrooms, lobbies, and retail spaces gain the most from metallic epoxy because the reflective surface draws attention and elevates brand image.

High-visibility areas benefit from the visual interest metallic floors provide. The reflective quality brightens spaces by bouncing light around the room. In commercial settings, this creates a modern, upscale atmosphere that impresses clients and customers.

Residential garages and basements also suit metallic coatings when homeowners want a distinctive look. The durability and easy maintenance make metallic epoxy practical for spaces that see regular use, not just decoration.

Do Jackson Showrooms Need Special Topcoats?

Yes, commercial spaces in Jackson require polyaspartic clear coats over metallic epoxy to resist scratches, scuffs, and UV exposure from storefront windows.

Polyaspartic topcoats cure faster and harder than standard epoxy clear coats. They provide superior abrasion resistance, which matters in retail environments with foot traffic, rolling carts, and display fixtures. Polyaspartic also resists yellowing from sunlight, keeping the metallic colors true over time.

In Mississippi showrooms near large windows, UV protection prevents the metallic pigments from fading. Supreme Floor Coatings applies polyaspartic topcoats on commercial metallic projects to ensure the floor holds up under daily use and maintains its appearance for years.

Supreme Floor Coatings operates locally in Jackson with a licensed and insured team trained in advanced metallic application methods. Every floor is ground, tested for moisture, and coated with attention to detail that ensures your investment performs as expected. For professional epoxy floor installation services in Jackson , you'll get a floor that's both beautiful and built to last.

Connect with Supreme Floor Coatings at 601-470-5666 to discuss your metallic flooring project and explore design options.

Flake Epoxy Flooring Solutions for Garages in Ridgeland

Wed, 10 Jun 2026 18:00:05 GMT

Flake Epoxy Flooring Solutions for Garages in Ridgeland

Flake epoxy flooring in Ridgeland, MS combines decorative colored flakes with a durable coating system that resists slips and stands up to heavy use in garages and workshops. Mississippi's high humidity demands proper moisture testing and diamond grinding before any coating touches your concrete, ensuring the floor is built to last.

How Does Flake Epoxy Coating Work?

Flake epoxy combines a base coat, broadcast colored flakes, and a clear topcoat to create a textured, non-slip surface.

The flakes add visual interest while improving traction underfoot. You choose from a range of colors and flake sizes to match your space. The topcoat seals everything together and protects the flakes from wear.

This multi-layer system delivers both function and style. It hides minor imperfections in the concrete while creating a surface that's easier to clean than bare concrete. The texture provided by the flakes makes the floor safer when wet or oily.

What Preparation Steps Matter Most?

Diamond grinding removes surface contaminants, opens concrete pores, and creates the profile needed for strong adhesion.

Every floor gets ground before coating. This step eliminates old sealers, oils, and weak surface layers that would cause adhesion failure. Grinding also levels minor ridges and smooths rough spots.

Moisture testing follows grinding to confirm the slab is dry enough for coating. High humidity in Mississippi means concrete can hold more moisture than in drier climates. Testing prevents coating failure caused by moisture vapor pushing up through the slab.

Crack fills and repairs come next, sealing any splits or damaged areas. Supreme Floor Coatings addresses these issues before applying the base coat. If you're searching for flake epoxy flooring services in Ridgeland , proper preparation ensures your coating bonds correctly and performs for years.

Which Flake Sizes and Colors Fit Your Space?

Flake size affects both appearance and texture, with small flakes creating a subtle look and larger flakes adding bold contrast.

Small flakes blend together for a more uniform surface. Medium and large flakes create a chunkier, more textured finish with greater slip resistance. You can mix sizes for a custom look.

Color selection lets you match existing decor or create contrast. Neutral blends work in professional workshops, while vibrant multi-color blends suit home garages. The flakes hide dirt and tire marks better than solid color coatings, keeping your floor looking cleaner between sweeps.

Do Mississippi Humidity Levels Affect Flake Epoxy?

Yes, Mississippi's year-round humidity requires moisture testing and proper concrete preparation to prevent coating delamination.

Concrete slabs in Ridgeland absorb moisture from the soil beneath and the humid air above. When moisture vapor rises through untested concrete, it can push epoxy coatings off the surface within months. Testing measures vapor emission rates before coating application.

Diamond grinding opens the concrete surface, but testing confirms the slab is dry enough to accept epoxy. Supreme Floor Coatings tests before applying any coatings on every project. This step is essential in the Greater Jackson metro area, where clay soils and seasonal rains keep ground moisture levels high.

Proper preparation and testing eliminate the guesswork. The result is a floor that stays bonded and performs as expected, even during humid summer months.

Supreme Floor Coatings is a locally owned and licensed business serving Ridgeland and the surrounding area. The team grinds all floors and tests moisture on every job, ensuring your flake epoxy floor is built to last. If you need reliable epoxy floor installation services in Ridgeland , you'll work with experienced installers who do it right the first time.

Call Supreme Floor Coatings at 601-470-5666 to schedule your consultation and see how proper preparation makes the difference.